Strain Gauge Meters for Weight, Force, Stress, Weight Indicator, Tensile Strength

5-digit DC digital panel meter with a most sensitive full-scale input down to ±20 mV. A built-in isolated 10 Vdc excitation supply powers four 350-ohm load cells in parallel. 4- or 6-wire bridge connection with ratiometric operation cancels variations in the excitation supply. Multiple selectable filtering methods assure a stable display. Programmable zero and span using three methods: scale and offset, two-points, and system-level calibration using actual transducer signals. Auto-tare with tare value stored in memory for weighing applications. Optional analog output, relays, and data I/O. Five 0.56" (14.2 mm) high digits, 1/8 DIN case.

A special firmware version for scale / weighing applications of Laureate digital panel meters with the load cell or process signal conditioner . Capabilities include display to 999,990 with fixed right-hand zero, auto-zero display function, auto-tare or manual tare with tare value stored in non-volatile memory, setpoint control with offset compensation for filling application, display toggle between gross or net weight, count by 1, 2, 5, 10, 20, 50 or 100 with rounding, and easy scale calibration using a known weight. Optional analog output, relays, and data I/O. Six (five active), 0.56" (14.2 mm) high digits, 1/8 DIN case.

Suitable for load cell and strain gauge applications when higher signal levels are available. All capabilities of the Laureate 5-digit Load Cell meter, except that most sensitive full scale is ±200 mV and bridge connection is limited to 4 wires.