Industrial Process Timers, Stopwatches, Pulse Width Meters, Duty Cycle Meters
Product Selection Guide
Stopwatch Mode for single events
Time Interval Mode for Time Delay
Time Interval Mode for Pulse Width
Laureate process timers are available as stopwatches, which time single events, as time interval meters, which time periodic events, and as duty cycle meters, which display average ON or OFF period as a percent of total period. Time can be displayed decimal hours, minutes or seconds, or in HH.MM.SS clock mode.
Times single events or processes which produce start and stop pulses. Resolution to 0.2 µs, duration from 1 µs to 999,999 hours. Time may be displayed in microseconds, milliseconds or decimal seconds with 6-digit resolution, or in HH.MM.SS clock format. Also accumulates time of multiple events to 999999 hours and retains power in the absence of power. Optional data I/O and relays for alarm or control. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Times periodic events which produce start and stop pulses from 1 µs to 199.99 s over a programmed gate time up to 199.99 s. Timing resolution to 0.2 µs. Optional data I/O and relays for alarm or control. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
Configured display ON or OFF period as a percentage of total period over a gate time from 10 ms to 199.99 s. A resolution of 1%, 0.1% or 0.01% is selectable. Ideal for repetitive pulses. Suitable for pulse widths down to less than 1 µs.
4-digit model (MM:SS or HH:MM) or 6-digit model (HH:MM:SS) with a digit height of 2.2" (57 mm), 4" (102 mm), 6" (150 mm), or 8" (200 mm) for long viewing distances. Optional dual 5A relays, analog output, and serial output. Sealed to NEMA-4 on all sides. Choice of display brightness and cases for indoor or outdoor installation.
