Digital Panel Meters for Position, Length, Angle & Speed
Exceptional flexibility to solve industrial measurement & control problems
Product Selection Guide
Position, length, angle and speed scaled to engineering units can be displayed by the three Laureate digital panel meters below. The readings are arithmetically scaled for display in engineering units, such as inches, mm, degrees, or m/s. Options include an analog output scaled to the display, relays for alarm or control, and data I/O. Five or six 0.56" (14.2 mm) high digits, 1/8 DIN case.
This counter accepts low-level differential or single-ended 5 V logic level quadrature signals from shaft encoders to display scaled position or scaled rate in engineering units from -999,999 to +999,999. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
For position, one channel counts pulses from a sensor with a pulse output, such as non-contact proximity switch, and a second channel is used to inhibit counts or to change the count direction for dynamic up / down totalizing. Speed can also be displayed. Display scaled in engineering units from -999,999 to +999,999. Six 0.56" (14.2 mm) high digits, 1/8 DIN case.
In linear displacement transducer or potentiometric pot follower applications, the signal from a sliding contact voltage divider is converted to position units such as feet, cm, or mm. Speed is obtained from successive readings. High 1 Gohm input resistance on 2 V scale. Display scaled in engineering units from -99,999 to +99,999. Five 0.56" (14.2 mm) high digits, 1/8 DIN case.